MATERIAL CATEGORY: PORCELAIN STONEWARE

Straight edge: not available for 6 mm massive worktops (use Apron edge), available for 12 mm massive worktops and for 6/12 mm backsplashes/backpanels. Holes and clamps will be produced with a minimum radius of 5 mm. Edges and bevels are always honed, even when the surface is polished. Ceramics with polished surface are more sensitive to scratches. We do not recommend the use of undermounted sinks with Ceramic surface because the edge of material can chip if accidentally bumped. With a flush-mounted sink, these edges are well-preserved.

The pictures are provided for information purposes only and cannot be considering binding, as there may be variations due to screen. Samples offer a better representation of the materials and finishes, although they are only intended to provide a general impression of the products.